Seagate Nas 2 Bay Device

The Seagate NAS 2 Bay device comes with and without a hard drive. If the Seagate NAS 2 Bay device is available without a hard drive, then it can also be said as diskless enclosures.Here, how to setup seagate Nas 2 Bay device with and without hard drive varies by a little bit.

The quick steps given below will assist you in setting up your Seagate NAS 2 Bay drive.

With Hard Drive

  1. Wired Connection setup.
  2. Switch on your Seagate NAS 2 bay.
  3. First sign and configuration.

Without Hard Drive

  1. Connection setup.
  2. Turn on your Seagate device.
  3. Inserting the hard drive into the NAS device.
  4. Sign in and configuration.
 how to set up Seagate Nas 2 bay



With Hard Drive – Wired Connection Setup

  1. Get an Ethernet cable to connect your Seagate NAS 2 device to the router.
  2. After that, connect the Seagate NAS 2 device to a wall outlet using the power cable.

Switch on your Seagate NAS 2 bay

  1. Locate and press the Power button your Seagate NAS 2 bay device.
  2. It may take a few minutes for the Seagate NAS 2 bay device to boot up.
  3. Wait for the LED light to turn into solid.

First sign in and configuration

  1. Open a web browser on your system.
  2. Navigate to the Seagate NAS device’s support page.
  3. Perform the on-screen instructions to complete the remaining set of installation steps.
  4. By using these steps we can execute that how to Setup Seagate Nas 2 Bay.

Without Hard Drive i.e., Diskless enclosure

Connectivity setup

  1. Using an Ethernet cable, link your Seagate NAS Diskless device to the router.
  2. After that, connect the NAS diskless device to the wall outlet using the power cable.

Turning your Seagate NAS diskless device ON

  1. while turning ON the NAS diskless device for the first time, it will be placed in the recovery mode.
  2. To set it, read and proceed with the guided instructions given below.
  3. Get a thin pointed like object to push the Recovery button.
  4. Locate the Recovery button on your Seagate NAS diskless device.
  5. Short push the Power button while holding the Recovery button.
  6. After that, release the Power button and push the Recovery button for at least five seconds.
  7. Wait for the NAS diskless device to complete the boot-up process.
  8. By utilizing these steps we can execute that how to Setup Seagate Nas 2 Bay.


Inserting a hard drive into the NAS device

  1. Take the empty tray from the NAS device.
  2. Place the hard drive in the empty tray.
  3. Make sure to mount the screws properly after inserting the hard drive.
  4. After that, place the hard drive tray back into the NAS device.

Sign in to the Seagate web page and configuration

  1. Power on your Seagate NAS 2 Bay device.
  2. Navigate to the Seagate device official page and perform the on-screen instructions to complete the configuration.
  3. To get remote assistance that how to Setup Seagate Nas 2 Bay device, click the Call button available on this screen.